Partner/Owner since 1998
Representative before the EPO

Employment test 11 - 50 employees
Company dna loesenbeck specht dantz
operating since 1931
Headquarter in Bielefeld and 2 offices
active in Legal Services

We have observed 155 EP applications Peter Specht has served for within the last five+ years. (We consider all applications which have an EP A1 or A2 publication dated after September 21, 2014). Please note, that we only count EP applications, in which the name of the patent attorney is explicitly mentioned as representative. These EP applications are:

EP14166235

Fitting for sliding furniture doors

IPC classification:
E05D 15/10
Applicant:
Hettich-Heinze GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP12797874

HOT CHANNEL DISTRIBUTOR ARRANGEMENT FOR A HOT CHANNEL SYSTEM

IPC classification:
B29C 45/27
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14001148

Surface structuring method

IPC classification:
B44C 5/04, B32B 21/04, B32B 3/30, B27D 5/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Agent:
Ralf Holland, Eikel & Partner GbR
Status:
PATENT GRANTED
EP14164127

Method and apparatus for producing milk products, in particular milk foam

IPC classification:
A47J 31/44
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14164131

Device for producing a milk foam

IPC classification:
A47J 31/44
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
NO OPPOSITION FILED WITHIN TIMELIMIT
EP13711314

METHOD AND INSTALLATION FOR PROCESSING RAW LIQUID MANURE AND/OR FERMENTATION RESIDUES FROM BIOGAS PRODUCTION

IPC classification:
C12M 1/00
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13713563

METHOD OF MECHANICALLY MILKING AN ANIMAL AND TEAT CUP LINER

IPC classification:
A01J 5/08, A01J 5/007
Applicant:
Wageningen University and Research Centre (Wageningen Universiteit)
Applicant:
Stichting Dienst Landbouwkundig Onderzoek
Applicant:
GEA Farm Technologies GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Agent:
Cornelis Marinus Jansen, Vereenigde Octrooibureaux NV (V.O.)
Status:
APPLICATION DEEMED TO BE WITHDRAWN
EP13711390

DISK BRAKE OF A MOTOR VEHICLE AND BRAKE LINING

IPC classification:
F16D 65/092, F16D 55/225
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP13711391

FLOATING-CALIPER DISK BRAKE OF A MOTOR VEHICLE

IPC classification:
F16D 66/02, F16D 55/226
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14166628

Heat exchanger for installation in confined spaces

IPC classification:
F28F 21/06, F28D 9/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14181159

Spring clamp for conductor

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13718789

MEANS FOR MOUNTING A CONTACT LINE OF A DEVICE FOR MONITORING BRAKE LINING WEAR

IPC classification:
F16D 66/02, F16D 65/097
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP13721971

PRINTER HAVING A SEPARATING DEVICE

IPC classification:
B65H 3/34, B65H 3/24
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13725640

METHOD FOR SOLUBILISING AND SEPARATING ONE OR A PLURALITY OF CARBOXYLIC ACIDS AND USE OF A DEMOBILISED SOLUBILISING COMPOUND

IPC classification:
C07C 51/50, C07B 63/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP12780135

SEPARATOR

IPC classification:
B04B 9/04, B04B 7/08, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP12729151

PULL-OUT GUIDE DEVICE FOR FURNITURE PARTS THAT ARE MOVABLE RELATIVE TO ONE ANOTHER COMPRISING A ROLLER BEARING DEVICE

IPC classification:
A47B 88/14, A47B 88/10
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP13732135

METHOD FOR REPROCESSING AN EMULSION FORMED DURING HYDROMETALLURGICAL RECOVERY OF A METAL

IPC classification:
C22B 3/26, B04B 13/00, B04B 11/02, B04B 1/20
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
No opposition filed within time limit
EP14188758

Method for detecting cleaning agents in a beverage machine, especially a coffee machine

IPC classification:
A47J 31/60, G01N 33/14, G01N 27/06
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
APPLICATION DEEMED TO BE WITHDRAWN
EP13732932

SYSTEM AND METHOD FOR REPROCESSING BILGE WATER AND SLUDGE

IPC classification:
C02F 101/32, C02F 11/12, C02F 1/38
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP13736864

SOLID-BOWL SCREW CENTRIFUGE WITH OVERFLOW WEIR

IPC classification:
B04B 1/20
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13729319

CRIMPING TOOL FOR WIRE END FERRULES

IPC classification:
H01R 43/042
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP13735042

SEPARATOR ARRANGEMENT

IPC classification:
B04B 15/08, B04B 11/08, B04B 11/06, B04B 7/02, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13735020

ELECTRIC CONTACT DEVICE FOR CONTACTING AN ELECTRIC CONDUCTOR

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13199375

Conveyor device for conveying suspended objects

IPC classification:
B65G 47/61, B65G 19/02, B65G 9/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP13750685

ADAPTER DEVICE FOR A DRAWER

IPC classification:
A47B 88/00
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP13783608

CONTROL BOX UNIT FOR A MILKING STATION, AND MILKING STATION ARRANGEMENT

IPC classification:
A01K 1/12
Applicant:
GEA Farm Technologies GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13783519

SERIES MODULE ARRANGEMENT WITH AN ENERGY BUS SYSTEM

IPC classification:
H01R 9/24, H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP13783518

SPRING FORCE TERMINAL WITH AN ACTUATION MEANS

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP15159586

SELF-ADJUSTING CRIMPING TOOL

IPC classification:
H01R 43/048, H01R 43/042
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP13802382

ELECTRICAL SUBASSEMBLY AND MEASURING METHOD FOR MONITORING COMPONENTS OF THE ELECTRICAL SUBASSEMBLY

IPC classification:
H02M 1/42, G01R 31/02
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP13811552

METHOD FOR OBTAINING VALUABLE PRODUCTS, IN PARTICULAR PROTEINS, FROM A NATIVE MIXTURE OF MATERIALS

IPC classification:
A23J 1/14, A23J 1/00
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP15165742

COMPOSITE PROFILE FOR DOORS, WINDOW OR FAÇADE ELEMENTS

IPC classification:
E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15165739

DOOR WITH A HANDLE PROFILE

IPC classification:
A47B 95/02, E06B 3/82, E06B 3/70, E06B 3/263, E05B 1/00
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP14700363

ARRANGEMENT HAVING A MODULE AND AN ELECTRONICS ARRANGEMENT

IPC classification:
H05K 7/14
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP15172711

FRAMEWORK AND METHOD FOR ASSEMBLING A NODE IN A SUPPORTING STRUCTURE

IPC classification:
E04B 1/58
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION IN PROGRESS
EP14717140

ROTARY VISCOUS VIBRATION DAMPER OR ROTARY VISCOUS VIBRATION ABSORBER

IPC classification:
F16F 15/173
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14716868

SPRING-FORCE CLAMPING ELEMENT WITH PIVOTING LEVER

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14713868

PLUG DEVICE FOR A SPRING-FORCE CONNECTION

IPC classification:
H01R 101/00, H01R 9/24, H01R 31/06, H01R 9/26, H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15180696

FUSE MODULE

IPC classification:
H01R 9/26, H01H 85/54, H01H 9/10
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP14718984

CONDUCTOR MARKER

IPC classification:
G09F 3/20, G09F 3/06, H01B 7/36
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14716860

DIRECT PLUG-IN COMPRESSION SPRING TERMINAL

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15181905

DEVICE AND METHOD FOR GENERATING MILK FOAM

IPC classification:
A47J 31/44
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15182151

DOOR OR WINDOW WITH FIRE PROTECTION PROPERTIES

IPC classification:
E06B 3/263, E06B 5/16
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
APPLICATION PUBLISHED
EP14722631

FUNCTIONAL FITTING FOR A SLIDING DOOR

IPC classification:
E05D 15/10
Applicant:
Hettich-Heinze GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14720615

GUIDING ASSEMBLY OF A SLIDING DOOR, A SLIDING DOOR AND A PIECE OF FURNITURE

IPC classification:
E05D 15/10
Applicant:
Hettich-Heinze GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15171593

FLOW MEASUREMENT IN A HOT DRINKS MACHINE, IN PARTICULAR A COFFEE MACHINE

IPC classification:
A47J 31/46, A47J 31/44, A47J 31/40, A47J 31/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION IN PROGRESS
EP14722243

BRAKE LINING MOUNTING FOR A DISC BRAKE

IPC classification:
F16D 65/097
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14725992

BASE MODULE FOR AN ELECTRONIC DEVICE

IPC classification:
H04L 12/40, H04W 8/24, H04L 12/24, H04L 9/08, H04L 12/28, H04L 29/06
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
PATENT GRANTED
EP15191227

COMPOSITE PROFILE FOR DOORS, WINDOW OR FAÇADE ELEMENTS

IPC classification:
E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15194162

CONNECTION DEVICE FOR MULTI-CONDUCTOR CABLES

IPC classification:
H01R 43/01, H01R 12/67, H01R 4/24
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15199695

WINDOW OR DOOR WITH A GLAZING REBATE ADHESIVE

IPC classification:
E06B 3/56, E06B 3/54
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14756043

FITTING FOR A PIECE OF FURNITURE OR DOMESTIC APPLIANCE, AND PIECE OF FURNITURE OR DOMESTIC APPLIANCE

IPC classification:
F16C 33/30, F16C 29/04, E05D 11/00, A47B 88/08
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15200636

METHOD FOR PRODUCING MILK FROTH AND METHOD FOR PRODUCING A MIXED COFFEE-MILK BEVERAGE

IPC classification:
A47J 31/44
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15202302

CHECKING DEVICE FOR A WINDOW OR A DOOR COMPRISING AN ENERGY STORAGE DEVICE

IPC classification:
E05F 1/10, E05D 15/52, E05D 15/30
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15202303

PIVOTING WINDOW WITH A SEALING ASSEMBLY

IPC classification:
E06B 3/263, E06B 3/40
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14766684

CLAMPING CAGE FOR AN EDGE CONNECTOR

IPC classification:
H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14850462

BRAKE CARRIER MOUNTING ARRANGEMENT

IPC classification:
F16D 65/02
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP14850689

DISC BRAKE PAD MOUNTING AND RETENTION SYSTEM AND METHOD

IPC classification:
F16D 55/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
GRANT OF PATENT INTENDED
EP14786828

METHOD FOR CLARIFYING A FLOWABLE PRODUCT BY WAY OF A CENTRIFUGE

IPC classification:
B04B 11/04, B04B 1/14
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14786883

METHOD FOR CONTINUOUSLY CLARIFYING A FLOWABLE SUSPENSION WITH A CENTRIFUGE

IPC classification:
B04B 11/04, B04B 1/14
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14792429

METHOD FOR CLARIFYING A FLOWABLE PRODUCT WITH A CENTRIFUGE

IPC classification:
B04B 11/04, B04B 1/14
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP14789240

METHOD FOR OBTAINING STARCH

IPC classification:
C08B 30/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
APPLICATION DEEMED TO BE WITHDRAWN
EP14808964

BEARING ARRANGEMENT FOR CENTRIFUGES

IPC classification:
B04B 1/20, F16C 33/66, F16C 37/00
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP14815615

GRATING TOOL

IPC classification:
B02C 18/18, B02C 18/14
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Vereenigde Octrooibureaux NV (V.O.)
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP16175370

METHOD FOR CREATING A COFFEE DRINK

IPC classification:
A47J 31/52, A47J 31/42, A47J 31/40, A47J 31/36
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16177795

METHOD FOR DETERMINING AND DISPENSING OF COSTS DURING THE OPERATION OF A PLANT FOR CENTRIFUGAL TREATMENT OF WASTE WATER OR SEWAGE SLUDGE, AND A PLANT FOR CARRYING OUT THE METHOD

IPC classification:
G06Q 50/06, G06Q 10/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
APPLICATION PUBLISHED
EP15709921

DISC BRAKE WITH PAD RETAINING CLIP AND SECURING DEVICE, AND BRAKE PAD SET

IPC classification:
F16D 55/226, F16D 65/097
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15710499

CONFIGURABLE ELECTRICAL CONNECTOR ASSEMBLY

IPC classification:
H01R 9/26
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15183553

MATERIAL FILLING APPARATUS FOR 3D PRINTING

IPC classification:
B65B 1/00, B29C 67/00, B65B 39/12, B65B 39/06, B29C 31/06
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15712603

TERMINAL BLOCK

IPC classification:
H01R 11/07, H01R 9/26, H01R 9/24
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15718914

COMPOSITE PROFILED ELEMENT FOR DOORS, WINDOWS, OR FAÇADE ELEMENTS

IPC classification:
E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15721641

DOOR, WINDOW, OR FACADE ELEMENT WITH A SEALING SYSTEM

IPC classification:
E06B 3/62, E06B 3/263, E06B 7/23
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15721642

COMPOSITE PROFILE FOR DOORS, WINDOWS OR FAÇADE ELEMENTS

IPC classification:
E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15720943

COMPOSITE PROFILED SECTION FOR DOORS, WINDOWS, OR FACADE ELEMENTS

IPC classification:
E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15713855

METHOD FOR ACQUIRING ONE OR A PLURALITY OF RECYCLABLE MATERIALS FROM SEEDS

IPC classification:
A23L 33/00, C07F 9/117
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15727638

METHOD AND DEVICE FOR PROCESSING AN ORGANIC OIL IN STEPS

IPC classification:
C11B 3/16, C11B 3/06, C11B 3/04, C11B 3/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15726571

METHOD FOR OBTAINING SINAPIC ACID FROM A NATIVE MATERIAL MIXTURE

IPC classification:
B01D 11/00, A23L 11/00
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15729433

SOLID-JACKET SCREW CENTRIFUGE AND METHOD FOR OPERATING THE SAME

IPC classification:
B04B 15/12, B04B 1/20
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP16197908

PLUG SEAL PROFILE AND PLUG SEAL ASSEMBLY

IPC classification:
E06B 7/23, E06B 3/62
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
APPLICATION PUBLISHED
EP15735924

FEEDBACK CONTROL METHOD FOR THE OPERATION OF A CENTRIFUGE

IPC classification:
B04B 13/00, B04B 11/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15749798

CONNECTION TERMINAL FOR A CONTINUOUS ELECTRICAL CONDUCTOR

IPC classification:
H01R 4/40
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15722152

TRANSPORT RACK AND/OR STORAGE RACK, AND ARRANGEMENT OF A TRANSPORT RACK AND/OR STORAGE RACK ON A FLOOR PLATE

IPC classification:
B65D 19/44, B65D 85/48
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15202475

DEVICE AND METHOD FOR CLEANING A BODY HAVING A SURFACE LAYER TO BE REMOVED

IPC classification:
B05B 3/02, B21B 45/08
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15753821

COMPRESSOR HEAD AND GASKET FOR SAME

IPC classification:
F16J 15/08, B60T 17/02, F04B 39/00, F04B 39/12
Applicant:
Bendix Commercial Vehicle Systems LLC
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
EXAMINATION REQUESTED
EP15760126

MARKING STRIP

IPC classification:
G09F 3/02, G09F 3/00, G09F 3/20, G09F 7/06, G09F 3/16, B29C 47/06, G09F 3/06, H01R 13/46, H01R 9/26, H01R 9/24
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17158467

DOOR WITH A HANDLE PROFILE

IPC classification:
E06B 3/70, E05B 17/00, E06B 3/82, E05B 1/00, E06B 3/263
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP17154347

DEVICE FOR PRODUCING BUTTER

IPC classification:
A01J 15/16, A01J 15/12
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP16159953

METHOD FOR PROVIDING PARTS OF A MULTI-PART IMPLANT OR MULTI-PART OSTEOSYNTHESIS

IPC classification:
A61F 2/30, A61B 17/68
Applicant:
University of Basel (Universität Basel)
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP17156312

SEALING STRIP FOR WINDOWS, DOORS OR FAÇADES

IPC classification:
E06B 7/23
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15798267

METHOD AND CONTROLLER FOR MONITORING BRAKE OPERATION

IPC classification:
B60T 7/04
Applicant:
Bendix Commercial Vehicle Systems LLC
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17159447

METHOD FOR MANUFACTURING RELIEF PANELS HAVING AN END-WOOD PATTERN

IPC classification:
B32B 21/02, B27M 3/00, B27D 5/00, B27D 1/00, B27D 1/08, B44F 9/02, B44C 5/04, B44C 1/24
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP15784698

METHOD FOR MONITORING AND/OR REGULATING THE OPERATION OF A CENTRIFUGE

IPC classification:
B04B 13/00, B04B 11/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17159452

DEVICE AND METHOD FOR WELDING MITRE CUT PLASTIC FRAME PROFILES

IPC classification:
B29L 31/00, B29C 65/78, B29C 65/20
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP15797338

HAND-ACTUATABLE PLIER TOOL

IPC classification:
H01R 43/042
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15794913

METHOD FOR MANUFACTURING A ROTATIONALLY SYMMETRICAL SHAPED ARTICLE

IPC classification:
B21D 53/10, B21D 22/16
Applicant:
ThyssenKrupp Steel Europe AG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15804094

SEPARATOR

IPC classification:
B04B 11/02, B04B 7/08, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15810622

ACTUATOR ARRANGEMENT FOR APPLYING A TORQUE TO A SHAFT, IN PARTICULAR A CRANKSHAFT OF A RECIPROCATING PISTON ENGINE, AND A CORRESPONDING METHOD

IPC classification:
F16F 15/30, F16F 15/14, B60W 30/20
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP15820708

APPARATUS AND METHOD FOR IMPACT FORMING A COTTER PIN

IPC classification:
B25B 27/08
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17174096

DISC BRAKE WITH A SYNCHRONOUS DEVICE

IPC classification:
F16D 65/56, F16D 65/18, F16D 55/226
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP15820711

SYSTEM AND METHOD FOR REDUCING AT LEAST ONE OF AIRFLOW TURBULENCE AND PRESSURE FLUCTUATION PROXIMATE A VALVE

IPC classification:
F04B 39/12, F04B 39/06, F04B 39/00
Applicant:
Bendix Commercial Vehicle Systems LLC
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP16700163

SEPARATOR

IPC classification:
B04B 1/08, B04B 15/06, B04B 7/02
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17174085

DISK BRAKE AND BRAKE LINING SET OF A DISK BRAKE

IPC classification:
F16D 65/095, F16D 65/00, F16D 55/226
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16700611

ARRANGEMENT OF MULTIPLE LATCHING FEET FOR AN ASSEMBLY, AND ASSEMBLY

IPC classification:
H01R 9/26, H02B 1/04, H02B 1/052
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP17181255

DOOR LEAF, DOOR AND A METHOD FOR MANUFACTURING THE DOOR LEAF

IPC classification:
E06B 3/70, E06B 3/82, E06B 3/72
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP16769383

DISC BRAKE PAD RETENTION SYSTEM AND MOUNTING METHOD

IPC classification:
F16D 65/095, F16D 65/092, F16D 65/04, F16D 65/097
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16710208

DRAWER SIDE WALL

IPC classification:
A47B 88/00
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16710205

WALL, PARTICULARLY A SIDE WALL, FOR A DRAWER

IPC classification:
A47B 88/00
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17182519

METHOD FOR OPERATING A BEVERAGE MACHINE FROM A PLURALITY OF BEVERAGE MACHINES

IPC classification:
A47J 31/52
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17186554

INDUCED AIR DISCHARGING UNIT

IPC classification:
F24F 3/16, F24F 1/01
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16735869

SEPARATOR DRUM AND SEPARATOR

IPC classification:
B04B 1/14, B04B 11/06, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16709624

METHODS FOR STERILIZATION AND/OR DISINFECTION

IPC classification:
A01P 1/00, A01N 25/06, A01N 37/16
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17207024

MULTIPLE STOP DEVICE FOR AN STOP LINING FOR FRAME, FRAME AND DRAWER

IPC classification:
A47B 88/95, A47B 88/90
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17207029

ENERGY ACCUMULATOR FOR A FITTING AND FITTING WITH AN ENERGY ACCUMULATOR

IPC classification:
A47B 88/95
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17207034

LOCKING DEVICE FOR A LOCKING FITTING FOR A FRAME AND FRAME WITH A LOCKING FITTING

IPC classification:
A47B 88/95, A47B 88/90
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP17208730

WINDOW OR DOOR WITH A SASH WITH A GLASS SUBSTRATE

IPC classification:
E06B 3/54
Applicant:
SCHÜCO International KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17152338

MIXING TOOL FOR A MIXER AND MIXER

IPC classification:
B01F 7/00, B01F 13/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16759733

TORSIONAL VIBRATION DAMPER HAVING A BEARING DEVICE

IPC classification:
F16C 17/10, F16F 15/173
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16753380

METHOD FOR FILTERING SEAWATER ONBOARD A SHIP

IPC classification:
C02F 1/00, B63J 4/00, B01D 29/60, B01D 29/11, B01D 35/147, B01D 35/157
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16842972

WEAR OPTIMIZED PAD DESIGN

IPC classification:
F16D 55/228, F16D 65/092
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP18158617

DISC BRAKE

IPC classification:
F16D 55/226
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16766547

CONNECTION HOUSING WITH A CONNECTION DEVICE FOR CONDUCTORS

IPC classification:
H01R 9/24, H01R 11/09, H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16766306

CONNECTION APPARATUS FOR CONDUCTORS

IPC classification:
H01R 11/09, H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16766546

CONNECTION DEVICE FOR CONDUCTORS

IPC classification:
H01R 11/09, H01R 25/16, H01R 9/24, H01R 4/48
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16763232

COOLING DEVICE FOR A DRIVE OF A SOLID BOWL SCREW CENTRIFUGE

IPC classification:
B04B 9/08, B04B 1/20
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16728282

SEPARATOR

IPC classification:
B04B 11/02, B04B 7/02, B04B 7/00, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16781800

ROTARY FILTER ARRANGEMENT HAVING A PLURALITY OF HOLLOW SHAFTS

IPC classification:
C02F 1/44, B01D 63/16
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The patent has been granted
EP16864907

DISC BRAKE AND SET OF BRAKE PADS

IPC classification:
F16D 65/092, F16D 55/227, F16D 55/2265, F16D 55/226, F16D 55/225, F16D 65/097
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16864902

DISC BRAKE AND SET OF BRAKE PADS

IPC classification:
F16D 65/092, F16D 55/227, F16D 55/2265, F16D 55/226, F16D 65/097
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16795344

TORSIONAL VIBRATION DAMPER HAVING A BEARING DEVICE AND METHOD FOR PRODUCING THE BEARING DEVICE

IPC classification:
F16C 33/04, F16C 33/20, F16C 17/10, F16F 15/173
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP16794986

CONTACT ELEMENT AND MULTIPLE CONTACT TULIP

IPC classification:
H01R 13/24, H01R 43/16, H01R 13/11
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17733428

SLIDING WALL ARRANGEMENT WITH A COVERING ELEMENT

IPC classification:
E05D 15/06
Agent:
Peter Specht, Loesenbeck Specht Dantz
Agent:
Andrea Rutz, Isler & Pedrazzini AG
Status:
Request for examination was made
EP18178629

DISC BRAKE FOR A COMMERCIAL VEHICLE AND BRAKE LINING SET

IPC classification:
F16D 55/00, F16D 55/224, F16D 65/00, F16D 65/092, F16D 65/095
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP18175858

TRANSVERSE CONNECTOR COMB

IPC classification:
H01R 43/16, H01R 9/26, H01R 31/08, H01R 25/16, H01R 13/405, H01R 13/11
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17705880

SEPARATOR

IPC classification:
B04B 7/08, B04B 1/14, B04B 1/10, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17711146

SEAL ARRANGEMENT FOR SEALING A GAP

IPC classification:
F16J 15/10, F16J 15/06, F16J 15/02
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17714679

METHOD FOR PRODUCING A MOULDED BODY COMPRISING A HUB AND DEVICE FOR CARRYING OUT THE METHOD

IPC classification:
B23P 15/00, F16D 3/22, F16C 33/38, B21D 22/16, B21D 53/12
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17779630

BRAKE DISC WITH CONING-COMPENSATING ARRANGEMENT

IPC classification:
F16D 65/84, F16D 65/78, F16D 55/28, F16D 55/26, F16D 55/22, F16D 65/12
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17716867

METHOD FOR OBTAINING AT LEAST ONE OR MORE BETA-GLUCAN COMPOUNDS OR A SOLIDS SUSPENSION CONTAING BETA GLUCAN FROM YEAST CELLS

IPC classification:
C08B 37/00, C12P 19/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP18189366

ARRANGEMENT OF A COVER ON A GUTTER

IPC classification:
E02D 29/14, E03F 5/06
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP17720739

SIDE PANEL FOR A DRAWER

IPC classification:
A47B 88/90
Applicant:
Paul Hettich GmbH & Co KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17723935

DEVICE FOR PRINTING, SEVERING AND APPLYING SELF-ADHESIVE FLAT STRUCTURES, IN PARTICULAR LABELS

IPC classification:
B65C 9/36, B65C 9/28, B65C 9/25
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17721387

METHOD FOR THERMALLY DISINFECTING A CENTRIFUGE

IPC classification:
B04B 15/06, B04B 1/08
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17716815

OUTLET NOZZLE FOR A CENTRIFUGAL DRUM, CENTRIFUGAL DRUM AND ASSEMBLY TOOL

IPC classification:
B04B 1/10
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17728540

CONNECTION BLOCK FOR AN ELECTRICAL DISTRIBUTION SYSTEM

IPC classification:
H01R 25/14, H02B 1/21, H01R 4/48, H01R 9/26
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17732390

MONITORING ATTACHMENT FOR MONITORING A NUT OF A SCREW CONNECTION AND METHOD FOR PRODUCING THE MONITORING ATTACHMENT

IPC classification:
F16B 1/00, F16B 37/14, F16B 31/02
Applicant:
Weidmüller Interface GmbH & Co. KG
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP18204116

METHOD FOR DETECTING THE OPERATING STATE OF A CENTRIFUGE

IPC classification:
B04B 1/14, B04B 7/06, B04B 11/02, B04B 13/00, B04B 11/04
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP19152074

OUTLET NOZZLE FOR A CENTRIFUGE DRUM

IPC classification:
B04B 1/10
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP17751278

TORSIONAL VIBRATION DAMPER

IPC classification:
F16F 15/167, F16F 15/14
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17754346

VALUABLE PRODUCT AND METHOD FOR OBTAINING A VALUABLE MATERIAL PHASE

IPC classification:
C12N 9/02, A23L 11/30, A23K 10/37
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17728875

METHOD FOR MONITORING A SCREW CENTRIFUGE

IPC classification:
B04B 1/20
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP17754313

METHOD FOR PROCESSING DANDELION PLANT COMPONENTS

IPC classification:
C08L 7/02, C08B 37/00
Applicant:
GEA Mechanical Equipment GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
Request for examination was made
EP19166325

SLIDING WALL ARRANGEMENT WITH A COVERING ELEMENT

IPC classification:
E05D 15/06
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP18159521

METHOD FOR WIRING TWO CONNECTION POINTS OF AN ELECTRIC INSULATION ASSEMBLY WITH A PARTIALLY PRE-TERMINATED ELECTRICAL CABLE

IPC classification:
H01B 7/36, H01B 13/34, H01R 43/28, H02B 3/00
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP19154666

DISC BRAKE WEAR ADJUSTER

IPC classification:
F16D 65/56, F16D 65/18, F16D 55/227
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published
EP18161298

PULL ROD DEVICE ARRANGEMENT OF A BRAKE CALIPER AND BRAKE CALIPER

IPC classification:
F16D 65/18, B61H 5/00, F16D 55/224
Applicant:
KNORR-BREMSE Systeme für Nutzfahrzeuge GmbH
Agent:
Peter Specht, Loesenbeck Specht Dantz
Status:
The application has been published

Please Sign in to use this feature